Unique Original Articles » Problems Common With Ceiling Fans

Almost all problem issues associated with Ceiling Fans is usually ascribed to the installation, and are very easily corrected. Listed in this article is a general outline of the most common mistakes.


Sounds
Motor size is the main element to quality. As time passes, it is fairly common for smaller size motors to create noises that are not repairable. Beneath are various important suggestions that can help figure out if that is the circumstance you have.

Switches
Trying to use a dimmer wall control on the fan may very well be a reason for just about any ceiling fan to hum. Electric Fan Motors should be controlled by a switch that won't differ the voltage. SW95 or SW90 are switches that will work with a good number of makes.

Mounting
Anything that is not tightened adequately usually will contribute to making louder any vibration the ceiling fan may make. Be certain that all screws and the fixtures are tight.


Wobble
It truly is considered common to see a small bit of movement in any Ceiling Fan operating at very high velocity. Blade balancing bundles included with almost all ceiling fans, can easily cut down on this nature of motion. Listed in this article are a few hints You could use if the ceiling fan wobbles more than usually.

The easiest test is for loose or poor mounting; Give the bottom of the ceiling fan a small push with your fingers. With stem mount fans the fan ought to come back to center and stop. Whenever the fan keeps moving, use the methods below for excessive motion.
Mounting: The mounting box in the ceiling has to be metallic, and securely fixed to a solid joist or brace kit. The mounting bracket from the ceiling fan must be tight to the electric mounting box.
Down rod or Stem: On ceiling fan with a down rod or stem make certain the groove on the ball at the top of the stem is aligned with the notch on the mounting bracket. There are typically more than one set screws to to be tightened at the ball and where the stem come together on the top of the ceiling fan.

Fan Blades: Fan Blades are matched sets, and their weight is within just a gram of each other. Floppy blades might be a cause of wobble. Make sure that all screws holding the ceiling fan blades to the fan, and the the ceiling fan blade assembly are secure. To identify you have a warped fan blade: Take a ruler to measure from the tip of the fan blade to the ceiling. Let the fan blades cross by the ruler to determine if one or more ceiling fan blade is lower or higher than the rest. There may perhaps be a small difference in height that will not cause any wobble issues.

The mentioned above is a standard run down of the most common things neglected, or done improperly when installing a Ceiling Fan. If you have more specific questions about the operation of any ceiling fan. Please contact us 952-898-2754 or 1-866-600-FANS(3267). Visit our main website Fan Man Lighting.

Fan Man Lighting / Fan Man Lighting / Article Submission Software